See There When You Can't Be There™
Place this plug-and-play camera in your home, office, vacation home or almost anywhere else you'd like to keep an eye on things, with no PC required at the location. The camera can be viewed and controlled from a standard web browser, video display, or even a compatible cell phone or PDA and requires no additional software for the PC that you're viewing it on. All of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera.

Any Image Bright and Clear
This camera captures stunning images for crisp, full-screen viewing and also features a CCD (Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed (maximum) has been increased to 30 images per second for smoother displays of moving images.

Two-Way Voice Communication
Use of the built-in microphone and a separately purchased amp-equipped speaker enables two-way voice communication (transceiver system) between the network camera and a PC used to monitor the camera image. In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera. Voice transmission and reception can be switched easily from the PC used to monitor the image.

Can Be Used Outdoors
This model was designed for outdoor operation and meets both IPX4 and UL6500 standards of outdoor equipment. It operates between -4°F and 122°F and is splash resistant for wet-weather operation.

Record Directly onto SD Cards
The camera features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately).

Power Up Without a PC
Power over Ethernet (PoE) means you can use your camera without connecting to a PC. Just plug your camera into a wall outlet, and both the power and the data are transmitted over the same CAT5 wire. Plus, each camera has a built-in web server with IP address. To view the camera's images on a PC, simply open a graphics-capable web browser and type in the cameras specified Internet address (password optional).

Control the Camera Remotely
Using a standard web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. There is Pan (left & right) movement and Tilt (up & down) movement available. You can also assign a "Home Position" that allows you to return the camera to a pre-designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen.

Sensor Recording and Image Alerts
With the built-in sensor, the camera can be set to record and/or notify you when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room.

Record Only What You Want to Record
The camera can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it is possible for the camera to email or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate your need to constantly check the image.

Features

Outdoor (splash-proof, low temperature) Pan/Tilt/Digital Zoom with Presets PoE (802.3af-compliant) Progressive Scan Analog Video Output Simultaneous MPEG-4 and JPEG SD Card Recording with Audio 0.09 Lux Color Night View Mode Up to 30 Frames per Second CCD Full Screen Monitoring Remote Monitoring from Cell Phone Full Screen 4-up and 12-up Multi-camera Pages

Up to 30 Video Users Built-in Web Server/IP Address (IPv4/v6) Audio Capability (2-way) Built-in Microphone Dual Sensor Input to Trigger Movement Image Transfer by Motion Detection, Sensor Alert, Timer Password Protection Plug-and-play Installation Free Web Address Multi-language Interface Image Date and Time Stamp 1 Year Warranty

The BB-HCM547A brings security and convenience to the forefront of home and business monitoring. The BB-HCM547A is an outdoor-ready ceiling-mounted pan/tilt/zoom network dome camera that offers 2.6x optical zoom with 360° pan and 73.4° wide views. perfect for business use, it can be viewed and controlled via a standard web browser, video display, or even a compatible cell phone or PDA, providing perfect monitoring of the home, office, vacation home or remote business location (such as a warehouse). The camera also comes with a free Web address, which can track the camera automatically and is compatible with all major web browsers.

Use of the camera’s built-in microphone and a separately purchased amp-equipped speaker enables two-way voice communication between the network camera and the computer used to monitor the camera image. In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera.

The BB-HCM547A features a sophisticated CCD (Charged Couple Device) for sharp, enhanced image capture. This camera also offers MPEG-4 and MJPEG Simultaneous Access. The image refreshing speed is 30 images per second for smooth display of moving images.

The camera can be connected through an Ethernet connection (or router) and powered by PoE (Power over Ethernet) or with an optional AC adaptor. The camera has a built-in Web server with IP address at which a user can view the camera’s images.

Movement of the camera (vertical tilt of 65 degrees) can be controlled using a standard Web browser, video display, or even a compatible cell phone or PDA. A "Home Position" can be assigned to allow users to return the camera to a pre-designated shooting position. Up to eight shooting positions can be registered in advance. Users can also click on part of the image and automatically bring that part to the center of the screen.

The camera can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it is possible for the camera to email or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate the need to constantly check the image.

With the built-in motion sensor, the camera can be set to record and/or notify you by email when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room.

The camera also include a range of home monitoring options that make peace of mind easier to come by when away from home. Simultaneous MPEG-4 and JPEG monitoring options help produce clear, smooth images. When viewing on a computer, a full-screen viewing option produces a bigger, easier-to-see image. Night view mode automatically brightens the image in low light. This allows the user to see clear, easy-to-view images even in the dark.

See There When You Can't Be There™
Place this plug-and-play camera in your home, office, vacation home or almost anywhere else you'd like to keep an eye on things, with no PC required at the location. The camera can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA and requires no additional software for the PC that you're viewing it on. All of the other required software, including control software (TCP/UDP) and e-mail software (SMTP),is already inside the camera.

Any Image Bright and Clear
This camera features a CCD (Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed (maximum) has been increased to 30 images per second for smoother displays of moving images.

Two-Way Voice Communication
Use of the built-in microphone and a separately purchased amp-equipped speaker enables two-way voice communication (transceiver system) between the network camera and a PC used to monitor the camera image. In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera. Voice transmission and reception can be switched easily from the PC used to monitor the image.

Record Directly onto SD Cards
The camera features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately).

Power up without a PC
Power over Ethernet (PoE) means you can use your camera without connecting to a PC. Just plug your camera into a wall outlet, and both the power and the data are transmitted over the same CAT5 wire. Plus, each camera has a built-in Web server with IP address. To view the camera's images on a PC, simply open a graphics-capable Web browser and type in the cameras specified Internet address (password optional).

Control the Camera Remotely
Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. There is Pan (left & right) movement and Tilt (up & down) movement available. You can also assign a "Home Position" that allows you to return the camera to a pre-designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen.

Sensor Recording and Image Alerts
With the built-in heat sensor, the camera can be set to record and/or notify you when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room.

Record Only What You Want to Record
The camera can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it is possible for the camera to email or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate your need to constantly check the image.

Features

Pan/Tilt/Digital Zoom with Presets PoE (802.3af-compliant) Progressive Scan Analog Video Output Simultaneous MPEG-4 and JPEG SD Card Recording with Audio 0.09 Lux Color Night View Mode Up to 30 Frames per Second CCD Full Screen Monitoring Remote Monitoring from Cell Phone Full Screen 4-up and 12-up Multi-camera Pages Up to 30 Video Users

Built-in Web Server/IP Address (IPv4/v6) Audio Capability (2-way) Built-in Microphone Dual Sensor Input to Trigger Movement Image Transfer by Motion Detection, Sensor Alert, Timer Password Protection Plug-and-play Installation Free Web Address Multi-language Interface Image Date and Time Stamp 1 Year Warranty

See There When You Can't Be There™
Place this plug-and-play camera in your home, office, vacation home or almost anywhere else you'd like to keep an eye on things, with no PC required at the location after initial setup. The camera can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA and requires no additional software for the PC that you're viewing it on. All of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera.

Any Image Bright and Clear
The 1280x1024 resolution captures stunning images for crisp, full-screen viewing. The image refreshing speed (maximum) has been increased to 30 images per second for smoother displays of moving images.

Two-Way Voice Communication
Use of the built-in microphone and a separately purchased amp-equipped speaker enables two-way voice communication (transceiver system) between the network camera and a PC used to monitor the camera image. In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera. Voice transmission and reception can be switched easily from the PC used to monitor the image.

Record Directly onto SD Cards
The camera features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately).

Power up without a PC
Power over Ethernet (PoE) means you can use your camera without connecting to a PC. Just plug your camera into a wall outlet, and both the power and the data are transmitted over the same CAT5 wire. Plus, each camera has a built-in Web server with IP address. To view the camera's images on a PC, simply open a graphics-capable Web browser and type in the cameras specified Internet address (password optional).

Control the Camera Remotely
Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. There is Pan (left & right) movement and Tilt (up & down) movement available. You can also assign a "Home Position" that allows you to return the camera to a pre-designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen.

Sensor Recording and Image Alerts
With the built-in sensor, the camera can be set to record and/or notify you when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room.

Record Only What You Want to Record
The camera can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it is possible for the camera to email or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate your need to constantly check the image.

Features

Mega-Pixel Image Capture Adaptive Contrast Enhancement Pan/Tilt/Digital Zoom with Presets PoE (802.3af-compliant) Progressive Scan Analog Video Output Simultaneous MPEG-4 and JPEG SD Card Recording with Audio 3 Lux Color Night View Mode Up to 30 Frames per Second CMOS Full Screen Monitoring Remote Monitoring from Cell Phone Full Screen 4-up and 12-up Multi-camera Pages

Up to 30 Video Users Built-in Web Server/IP Address (IPv4/v6) Audio Capability (2-way) Built-in Microphone Sensor Input to Trigger Movement Image Transfer by Motion Detection, Sensor Alert, Timer Password Protection Plug-and-play Installation Free Web Address Multi-language Interface Image Date and Time Stamp 1 Year Warranty

See There When You Can't Be There™
Meet our new dome-shaped, ceiling-mounted network camera with a zoom lens. The 4.6 zoom makes it possible to check places in detail. Its 73° wide viewing angle allows you to recognize much broader range at the single sight. Thanks to its Power Over Ethernet (PoE) capability, the camera can be installed in places where it is difficult to provide power, like on factory and warehouse ceilings, or near a building entranceway or elevator hall. This lets you grab every business possibility by breaking distance and time barriers with Zero Distance Management.

Wide-Angle Lens
The use of a 73° wide-angle lens lets you monitor a wide area in a single view. The coverage can be increased even more by combining pan and tilt operation.

Simultaneous MPEG-4 and JPEG
Cameras simultaneously send MPEG-4 images in three resolutions (VGA, QVGA and SCIF), and JPEG images in the same three resolutions in favor motion, standard and favor clarirt image-quality types. MPEG-4 is recommended for viweing smooth motion images, and JPEG is recommended for recording higher quality images.

Progressive Scan
Progressive scanning eliminates the blurring that oftern occurs with interlaced scanning, to produce high-quality images.

SSL Support
Recorded data is sent in encrypted form, making it very difficult for someone else to "eavesdrop" on the network.

Motion Detection Function
This function detects changes by reacting to a camera threshold or sensitivity that is set in advance on the PC. Captured images can also be stored temporarily in the camera or sent to you be email or FTP data transfer.

Recording Program
Video data can be downloaded to a PC using optional software. In stores, this allows for more detailed monitoring of customer behavior, and of employee attitudes toward customers, information that cannot be obtained from still images alone.

Easy PoE Supply
The power is supplied through the Ethernet cable, so the network camera can be installed on the ceiling very easily since the additional work for the power outlet is not required.

Optional Ceiling Flush Mount Bracket
Using the optional bracket, you can mount everything except the lens neatly inside the ceiling space.

See There When You Can't Be There™
Place this plug-and-play camera in your home, office, vacation home or almost anywhere else you'd like to keep an eye on things, with no PC required at the location. The camera can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA and requires no additional software for the PC that you're viewing it on. All of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera.

Bring Any Image Right Up Close
Equipped with a 42x zoom function (a 21x optical zoom and a 2x digital zoom), the camera lets you zoom in and out in a total of 12 steps (10-step optical zoom and 2-step digital zoom) to view objects that are close or far away.

CCD Sensor for Enhanced Image Expression
This camera features a CCD (Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed (maximum) has been increased to 30 images per second for smoother displays of moving images.

Record Directly onto SD Cards
The camera features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately).

Control the Camera Remotely
Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. There is 350 Pan (left & right) movement and 210 Tilt (up & down) movement available. You can also assign a "Home Position" that allows you to return the camera to a pre- designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen.

Sensor Recording and Image Alerts
With the built-in sensor, the camera can be set to record and/or notify you when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room.

Features

42x Zoom (21x optical) High-speed 350 Pan/210 Tilt with Presets Progressive Scan Analog Video Output Simultaneous MPEG-4 and JPEG SD Card Recording with Audio 0.09 Lux Color Night View Mode Up to 30 Frames per Second CCD Full Screen Monitoring Remote Monitoring from Cell Phone Full Screen 4-up and 12-up Multi-camera Pages

Up to 30 Video Users Built-in Web Server/IP Address (IPv4/v6) Sensor Input to Trigger Movement Email Triggered by Motion Detection, Sensor Alert, Timer Password Protection Plug-and-play Installation Free Web Address Multi-language Interface Image Date and Time Stamp 1 Year Warranty

See There When You Can't Be There™
Place this plug-and-play camera in your home, office, vacation home or almost anywhere else you'd like to keep an eye on things, with no PC required at the location. The camera can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA and requires no additional software for the PC that you're viewing it on. All of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera.

Bring Any Image Right Up Close
Equipped with a 42x zoom function (a 21x optical zoom and a 2x digital zoom), the camera lets you zoom in and out in a total of 12 steps (10-step optical zoom and 2-step digital zoom) to view objects that are close or far away.

CCD Sensor for Enhanced Image Expression
This camera features a CCD (Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed (maximum) has been increased to 30 images per second for smoother displays of moving images.

Record Directly onto SD Cards
The camera features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately).

Power up without a PC
Power over Ethernet (PoE) means you can use your camera without connecting to a PC. Just plug your camera into a wall outlet, and both the power and the data are transmitted over the same CAT5 wire. Plus, each camera has a built-in Web server with IP address. To view the camera's images on a PC, simply open a graphics-capable Web browser and type in the cameras specified Internet address (password optional).

Control the Camera Remotely
Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. There is 350 Pan (left & right) movement and 210 Tilt (up & down) movement available. You can also assign a "Home Position" that allows you to return the camera to a pre-designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen.

Sensor Recording and Image Alerts
With the built-in sensor, the camera can be set to record and/or notify you when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room.

Record Only What You Want to Record
The camera can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it is possible for the camera to email or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate your need to constantly check the image.

Features

42x Zoom (21x optical) High-speed 350 Pan/210 Tilt with Presets PoE (802.3af-compliant) Progressive Scan Analog Video Output Simultaneous MPEG-4 and JPEG SD Card Recording with Audio 0.09 Lux Color Night View Mode Up to 30 Frames per Second CCD Full Screen Monitoring Remote Monitoring from Cell Phone Full Screen 4-up and 12-up Multi-camera Pages

Up to 30 Video Users Built-in Web Server/IP Address (IPv4/v6) Audio Capability (2-way) Sensor Input to Trigger Movement Email Triggered by Motion Detection, Sensor Alert, Timer Password Protection Plug-and-play Installation Free Web Address Multi-language Interface Image Date and Time Stamp 1 Year Warranty